These AMT commercial/industrial centrifugal pumps are non-self-priming (gravity feed) units designed to handle high-pressure low flow liquid transfer applications where no suction lift is required. Typical installations include hot and chilled water, boiler feed, condensate return, irrigation, high pressure wash-down, booster service, and fire protection/sprinkler systems—often referred to as a Jockey Pump. These pumps have NOT been investigated for use in potable (drinking) water systems.

» MSV1 All Stages

These AMT commercial/industrial centrifugal pumps are non-self-priming (gravity feed) units designed to handle high-pressure low flow liquid transfer applications where no suction lift is required. Typical installations include hot and chilled water, boiler feed, condensate return, irrigation, high pressure wash-down, booster service, and fire protection/sprinkler systems—often referred to as a Jockey Pump. These pumps have NOT been investigated for use in potable (drinking) water systems.

» MSV3 All Stages

The CR-H is a variant of CR pumps and offers the same features as CR pumps. The critical dimensions of the CR-H match the ANSI/ASME B73.1. The CR-H offers higher efficiencies than standard ANSI pumps resulting in energy savings and reduced installation cost.

» CR-H

The basic CR pump range is available in four different materials including cast iron (CR), two grades of stainless steel (CRI / CRN), and all-titanium versions (CRT) in eleven flow sizes, capable of producing almost 50 bars of pressure, and with a variety of shaft seals, rubbers, and supply voltages.

» CR 1 » CR 10 » CR 120 » CR 15 » CR 150 » CR 1s » CR 20 » CR 3 » CR 32 » CR 5 » CR 64 » CR 90

The MVI is the pressure-boosting workhorse of the WILO lineup, and is applicable in a variety of municipal, industrial, process, commercial and HVAC applications ranging from pressure boosting and water supply, to washing systems and boiler feed. Featuring built-in air venting and priming plugs, standard Baldor NEMA frame motors, an extra thrust bearing in the pump end, and an excellent commercial pump warranty, the MVI stays well ahead of the pack. Wilo-Multivert MVI 10,15,30,50 and 80

» MVI 10 » MVI 15 » MVI 30 » MVI 50

The WILO MVIS is the only pressure booster pump with maintenance-free wet rotor technology in the world! The MVIS features a maximum noise output of 40db, stainless steel construction for potable water pressure boosting applications, and maintenance-free wet rotor technology that eliminates seals and couplings. It is also suitable for condenser and chilled water, as well as for use with VFD’s.

» MVIS 15 » MVIS 30 » MVIS 50