* Single-phase, 60 Hz, 2-pole motor; insulation class B, protection type IP 68. Motor is dynamically balanced with stainless steel shaft. Thermal sensors in the stator switch off the pump in the case of overheating and automatically switch it back on after cooling down.

* The stainless steel rotor shaft is supported in lubricated-forlife ball bearings.

* Connection chamber with cover and watertight cable inlet and strain relief.

* Discharge outlet with internal thread, built-in checkvalve, and detachable multi-stage hose adaptor.

* Shaft sealing is by three lip seals, single at the motor side and double at the medium side, separated and lubricated by a grease chamber.

* The medium being pumped flows around the motor housing for optimum heat dissipation. The maximum allowable medium temperature is 104 °F; or up to 140 °F for intermittent usage (max 5 minutes).

* Built-in automatic level control, with easily removable float cover for cleaning purposes.

* Integrated switch for continuous operation in transportable applications.

* Bayonet clamping allows the screen to be removed by hand in the event an impeller inspection is necessary.

* Two-position manual/automatic switch.

* Rust-proof polypropylene construction.

* Fits into 8” diameter opening.

* 1½” female discharge.

* Checkvalve included.

* Environmentally safe, air-filled, oil-free motor,with capacitor start.

* Clog-proof impeller design.

* Solids handling capacity up to ½”.

* Detachable suction ring in Robusta 200 and 300 allows pumping down to a 1/8” (manual mode only).