S09/2D
|
ABS Piranha S09/2D Grinder 2.68HP/230V/460V/3PH,
No Control Req'd.
|
|
Motor
Three-phase 230/460 Amps 8.0/4.0 Insulation class F; protection type IP 68.
Cooled by amply dimensioned cooling areas.
Piranha S10-S30 is available in explosive-proof version to FM/CSA standards.
Bearings
The stainless steel motor shaft is supported in lubricated-for-life
ball bearings.
Shaft sealing
Between motor and hydraulic section by means of a high quality
sealing unit using a silicon carbide mechanical seal, independent
of direction of rotation and resistant to temperature shock. Seal at
motor side is by oil lubricated lip seal.
Discharge
Piranha 09: 1¼” internal thread Piranha S10 to S30: DN 32 flange
(1¼” threaded adaptor available as accessory)
Shredding system
Spiral bottom plate and stationary cutter ring combined with
a shredding rotor located before the impeller, for optimum
blockage-free running.
Temperature monitoring
TCS (Thermo-Control-System) with thermal sensors in the stator
to switch off the pump in the case of overheating and switch on
automatically after cooling down.
Seal monitoring
DI system consisting of a sensor in the motor and oil chambers
which activates an alarm if there is leakage at the shaft seals.
Not available for Piranha 09.
